The bathroom is undoubtedly one of the most important rooms in the house, so a good cleaning will make it look newer.
One of the rooms in the house where the most dirt accumulates is, without a doubt, the bathroom. Even though this is the place where we cleanse ourselves, this place has a tendency accumulate many unpleasant shortcomings, as a lot of moisture accumulates, which causes mold and mildew to appear. In addition, limescale and soap scale accumulate in the tile joints. And the worst thing is not this, but the fact that we can make the situation worse if we want to clean and use products that will further damage our tiles.
Since you certainly don’t want your bathroom to be in these conditions, From Bekia we will tell you how to clean bathroom tiles.. First of all, you should know that there are two main options: use special products created for this cleaning, or make your own homemade cleaning products and tricks. It’s up to you to decide what you prefer to use, although you should read these tips first to ensure the bathroom we provide you remains spotless.
Cleaning tiles with vinegar
One of the most classic cleaning ingredients is the use of vinegar, be it for the bathroom or any other room or element of the home. Learn this trick well because once you try it, you won’t be able to stop repeating it. Yes indeed this time the smell will work against usTherefore, you should be warned and open the windows before cleaning.
The only thing you need to take is evaporator, fill it with water and add a little vinegar.. Next, mix well and start spreading on the tiles. We recommend using a sponge and washcloth to scrub thoroughly and remove dirt. Be sure to rinse again with water to remove as much of the vinegar smell as possible.
Cleaning tiles with baking soda
Another one of A traditional product used in cleaning is baking soda.. However, some care must be taken with this product as you must use gloves to avoid damaging the skin on your hands. In addition, we also recommend, as in the previous case, open the windows to ventilatebecause it is a strong product.
To clean with this product, you will have to mix baking soda well with a small amount of liquid soap. Once the mixture is prepared, all you have to do is apply it to the tiles. Depending on how dirty it is, you will apply more or less of it and it will take longer or less time. Therefore, we recommend that if there is a lot of dirt Let the baking soda mixture sit for a few minutes.. You should also wait longer at the joints, as this is the area where more moisture, soap residue, and dirt accumulate.
Cleaning bathroom tiles with ammonia
Ammonia is another product that you can use to make a home remedy to clean your bathroom tiles. Of course, remember what we noted earlier: ventilation is very important in such cases. Moreover, being corrosive product You should also use gloves and avoid getting splashes on your face or eyes. In this case, it is necessary to rinse very well with plenty of water.
Ammonia is usually highly recommended in our bathroom. traces of lime and grease stains have accumulated. All we need to do is pour some ammonia into a container of water. You just need take a sponge or cloth, Dip it into the mixture and rub the tiles well. Once you’ve cleaned them, take another cloth or ammonia-free rag and wipe the entire surface with it to remove any residue.
Cleaning tile joints
It should be clear to you that tiles are not just a part of tiles, but there is another very important element that you should include in your cleaning. We are talking about boards, one of the parts where the most dirt accumulates and also where it is most difficult to clean. Therefore, you need to be careful not to let too much time pass between one cleaning and the next. Plus, if they become darkened by dirt, they will give your bathroom an aged look.
To clean the joints between tiles, we recommend using Toothbrush. Along with this device, you need to prepare a mixture of water and bleach, one of the best whitening aids. So dip your brush in the liquid and scrub well to remove any dirt. When you’re done, wipe it down again with soap and water to avoid leaving any marks. Again, you should coat your hands with this ingredient to avoid damage.
Clean with alcohol
Finally, the trick we suggest: clean tiles with alcohol, a product that we usually have at home. To use it, you can do it in two ways. First, pour some product onto a cloth and scrub the tiles well, you will see that they remain very shiny. Although you should also ensure that the fabric does not release lint.
On the other hand, you can mix alcohol with ammonia in equal quantities, a little detergent and a large amount of water. This mixture will also be very effective and will give very good results.
How to keep bathroom tiles clean
These cleaning techniques are usually very effective at removing dirt that has accumulated on tiles over a long period of time. However, perhaps those the stains are already so ingrained that it is very difficult to remove them and some are even impossible. Therefore, you should do a little daily cleaning and follow the following tips What we will give you:
- Ventilate the bathroom: When we finish taking a shower, we will notice that a large amount of mist and heat accumulates in our bathroom. Therefore, we must give it an outlet so that it does not accumulate and spoil our bathroom. It is important to ventilate the area for a few minutes to prevent mold from growing on the tiles. In fact, you can take this moment after your shower to clean with a cloth, as the humidity will make it easier to remove dirt.
- Clean instantly: Don’t leave for tomorrow what you can do today. If you ever get something dirty or see a stain, don’t put off cleaning it because the more time passes, the more ingrained it will be and therefore the harder it will be to remove.