How to remove a stump from a tree

Completely removing tree debris can be a challenge, especially if the stump is wide or the roots are buried deep.

Because it is sick, because it is at risk of falling, or because it has grown too large for the area in which it is planted. There are many reasons that can lead to the need to get rid of a tree, and the process can be quick if done with the right equipment and machinery. But the real problem lies with the stump that remains after the tree is removed. And completely removing these residues can be a challenge and a real headache if the stump is too wide or the roots are deeply buried in the skin. However, you should never leave a stump and not worry about itas this may result in new shoots appearing on both the trunk and roots or the development of fungi or other diseases such as Armilaria or Fosuarium.

With the right equipment and technique, tree stump removal can be a simple task.With the right equipment and technique, tree stump removal can be a simple task.

When removing a stump, you can find different techniques that use different tools, such as chemicals or a tree grinder. In any case, before choosing one method or another, it will be necessary to check the condition of the stump (width, depth, condition of the wood…), as well as the surrounding area for possible detection of an underground service network through a magnetic field. Except, Some safety precautions need to be taken to ensure that the person who is about to remove the stump does not suffer any harm.. As for the ideal time to remove these residues from the tree, the truth is that it can be done at any time, although ideally it should be done while cutting down the tree. This is due, for example, to the fact that the use of chemicals must be done with freshly cut wood. Below we present some of the most commonly used tree stump removal methods.

Dig with a shovel

This method is recommended for small trees whose roots are not very long or go too deep into the ground. To do this you will need a shovel, pruning shears or other similar tool with which Dig up the entire stump until the roots are completely visible. Next, you will have to cut them with a hoe or ax until they are removed down to the very tips.. If they are too stuck, you can also try to squash them with a tool or even use a chainsaw with proper precautions. Finally, when the roots are completely removed, remove the stump by prying it up with a shovel or by chopping it into smaller pieces if it is too large.

Use a chopper

This tool has large, very sharp steel blades that can destroy a wood stump in just a few minutes. Its application is usually applied to large stumps and allows you to turn the stumps into chips that sink into the ground to a depth of 20 centimeters. The chipper should be moved around the area until the rest of the tree and all its roots are completely destroyed.. However, we must remember that this is a tool that needs to be used perfectly as a mistake can have disastrous consequences. This is why, although they can be rented, it is best to have a professional gardener do it.

Using a tree stump grinder, removing a tree stump can only take a few minutes.Using a tree stump grinder, removing a tree stump can only take a few minutes.

Choose an excavator

This is considered one of the most effective methods for permanent stump removal, but it usually costs the most money. Backhoe loaders, also known as skid steer loaders, should be serviced by professionals who are familiar with how they work. Except, Its use is generally not recommended if you want to remove a single stump.but when there is a large group of them.

Application of chemicals

This method can be used by anyone, as long as you read the packaging and follow all instructions for use and protective materials such as a mask or gloves indicated on the packaging. However, This is also the process that takes the longest and is usually recommended to be done in the fall or winter.. When using these products, it is necessary to make several holes along the edge of the stump using a drill and always on freshly cut wood. If the tree was cut down some time ago, you will have to saw the surface again to allow it to penetrate the wood before pouring the products into the holes. When the stump has softened enough, it can be removed, for example, by prying or digging with a shovel.. Most of these products contain potassium nitrate, which gradually decomposes wood, as well as a component called glyphosate, which makes these products illegal in the city. In addition, we must also be aware that these products can be harmful to nature and also ensure that children and pets do not get close to them once the chemical has been applied.

Using chemicals is the slowest option and should be done in the fall or winter.Using chemicals is the slowest option and should be done in the fall or winter.

burn the stump

This is one of the least recommended options, especially because tree stumps are usually not in ideal condition to catch fire easily, and many precautions must be taken to prevent the fire from spreading. Except, You should also check to see if there are local restrictions against burning remains for this purpose and, if not, seek permission from localities to do so.. The technique involves using wood and other materials to light a small fire on a tree stump to allow it to decompose. This process can take several hours, so it is necessary to constantly monitor and rekindle the fire if necessary.

Remove it by prying it off

This solution does not always completely eliminate the remaining wood and forces the use of other alternative methods. To do this, you can use a rope, a winch or a mini-excavator and a lever to remove the stump. For this, It should not be cut at ground level and should have a good height of up to 1.2 meters..

To obtain leverage, the stump must be a certain size.To obtain leverage, the stump must be a certain size.

As you have seen, removing a stump is not as easy as it may seem and in most cases it should be left to a professional. In any case, you should always use appropriate equipment such as goggles, gloves, a mask or a special suit to avoid injury. Finally, regardless of the stump removal method, After it is removed, the hole will have to be sealed and filled with sawdust or substrate. so as not to leave a hole in the soil and not prepare it for replanting.

Leave a Comment